Authorized Partner of Container One, A+ BBB rated, 30 years in the container industry.
Pillar Guide

Conex Box in Minnesota: A Complete Guide for Minnesota Buyers

Conex box, shipping container, storage container: the words get used interchangeably. What changes from one Minnesota order to the next is the size, the grade and the delivery route.

Get a Free Quote (330) 510-5817

What is a Conex Box?

The word conex (sometimes spelled CONEX) is short for "container express," a term coined by the United States military in the 1950s for a standardized steel shipping container used to move equipment and supplies during the Korean War. The original CONEX boxes were 8.5 feet by 6 feet by 6.8 feet, much smaller than today's intermodal units, but the principle was identical: a stackable, lockable, weatherproof steel box that could move by truck, rail, or ship without unpacking.

By the late 1960s the commercial shipping industry had standardized on 20-foot and 40-foot intermodal containers, the units you see on every cargo ship and rail line today. The military term stuck in everyday speech. Many people still call any large steel storage box a conex, even when the unit is technically an ISO shipping container or a purpose-built storage container.

Conex Box vs Shipping Container vs Storage Container

The vocabulary lines up like this:

  • Conex box. Originally a military-spec container. In modern use, a colloquial name for any steel shipping container used for storage. Most commonly applied to 20-foot and 40-foot units in residential and contractor settings.
  • Shipping container. The technical term for an ISO-standard intermodal container. These are the units that cross oceans on cargo ships. They are built to ISO 1496 specifications, which dictate dimensions, lifting points, and structural strength.
  • Storage container. A general retail and rental term used by ground-storage companies. Often refers to the same intermodal unit, but the phrase also covers purpose-built ground-level containers that have never seen ocean service.

If you are shopping for storage, the difference rarely matters.

Standard Conex Box Sizes

There are three standard sizes:

  • 20-foot standard. Length 20 ft, width 8 ft, height 8 ft 6 in. Interior floor about 19 ft 4 in by 7 ft 9 in, with 7 ft 10 in of height.
  • 40-foot standard. Length 40 ft, width 8 ft, height 8 ft 6 in. Roughly 2,350 cubic feet, double the 20-foot. Best for contractors, farms, and businesses.
  • 40-foot high cube. Length 40 ft, width 8 ft, height 9 ft 6 in. The extra foot of headroom adds about 350 cubic feet of usable space, which matters when you store racked goods or tall equipment.

Specialty sizes (10-foot, 45-foot, refrigerated, double-door, side-opening) exist but are less common.

Common Uses by Industry

In Minnesota, containers can serve these industries:

  • Farm operations can keep seed, tools, parts and small equipment dry in a container between seasons.
  • Construction crews can lock tools and materials on a job site for the length of a building season.
  • Mining and forestry contractors on the Iron Range and in the northern woods can store parts and gear at remote sites.
  • Manufacturers and distributors can add overflow storage for inventory, packaging and seasonal stock.
  • Resorts, marinas and cabin owners in lake country can store dock sections, small boats and equipment over the winter.

Common uses:

  • Tool, chemical, and equipment storage at working yards. Steel walls, lockable doors, and on-site placement make a conex a practical substitute for a built shed, a fenced compound or a temporary office.
  • Weather-event storage for documents, heirlooms, and inventory.
  • Construction jobsite storage on long-cycle builds.
  • Acreage and farm storage. Permanent storage for the things a garage or barn cannot fit.

How to Choose the Right Conex Box

Three questions narrow the decision quickly:

  1. How much space do you need? List what you intend to store. A 20-foot unit works for household goods during a renovation, materials for a residential framing job, or a few pallets of stock. A 40-foot unit doubles that. Compare the list with the container dimensions before you choose.
  2. How clean does the interior need to be? If you are storing tools, equipment, or boxed goods, a used wind-and-water-tight unit is fine. If the unit will be converted to an office, a workshop, or a clean storage space, a one-trip unit saves the cost of repainting and floor refinishing later.
  3. How long will you use it? For a project that ends in a few months, compare the cost of renting from a rental company with the cost of buying. Our rent vs buy guide walks through the crossover math.

How Delivery Works in Minnesota

Container One offers Tilt Bed and Customer Assist delivery. With Tilt Bed, the trailer tilts back and the container slides off without help from you. Customer Assist requires an anchor point on your site: a chain connects the container to it, and the container slides onto the ground as the trailer pulls away. Delivery follows this sequence:

  1. Site check. You confirm the access route, the placement spot and the overhead clearance before delivery. A 20-foot delivery needs 110 feet of straight clearance. The truck needs at least 15 feet of height to drive, at least 22 feet of height along the entire unloading path, and at least 10 feet of width. A 40-foot delivery needs 130 feet of straight clearance.
  2. Surface check. Concrete, asphalt, gravel, hard-packed dirt, and grass all work. Soft, waterlogged, or steeply sloped ground may need preparation.
  3. Final placement. The driver sets the container down on the prepared spot.

Container One's Delivery/Dispatch department contacts you to schedule each delivery. Delivery areas across Minnesota:

  • Minneapolis, St. Paul and the Twin Cities metro
  • Rochester and southeast Minnesota
  • Greater Minnesota, from St. Cloud and Mankato to Duluth and the Red River Valley

Permits and Local Rules

Permit requirements depend on city regulations inside city limits and county regulations outside city limits. Before ordering, check with your local building or planning department, and verify HOA rules if they apply. The permit guide for this state covers the questions to ask: container permits in Minnesota.

What a Conex Box Costs in Minnesota

Pricing is ZIP-specific, because delivery is part of the price. Minnesota delivered pricing: starting at $2,465 for a 20ft Wind and Water Tight container delivered in Minneapolis. Prices as of October 14, 2026.

Frequently Asked Questions About Conex Boxes

St. Paul Legislative Code Sec. 34.08(6) prohibits accumulating and storing portable storage containers and intermodal cargo containers on residential property. Zoning Code Sec. 60.217 defines placement of an intermodal cargo container for five or fewer days as parking. Sec. 60.220 defines placement of a portable storage container as storage without specifying a minimum number of days. It also defines placement of an intermodal cargo container as storage when the container has gone more than five days without being used. Ask the Zoning Section at 651-266-9008 how these provisions apply to your lot and what counts as use of a container holding belongings before ordering.
Rochester's Unified Development Code, Section 60.300.020H.6.b, restricts containers in Agricultural and Residential districts to sites containing a park, school or place of worship, with a maximum of six months per year. Section 60.300.020H.6.d also covers residential districts and sets a 14-day limit for temporary placement there and on properties with a residential primary use in Mixed Use districts. For construction of a new primary building or a major addition to an existing primary building, H.6.d specifies a placement period from issuance of the first building permit to issuance of the last certificate of occupancy or use for that building. Before arranging placement, ask Community Development at 507-328-2600 whether your site qualifies and how both provisions affect the placement period for your proposed use.
Yes, a conex box can provide storage through a Minnesota winter. Container One describes Wind and Water Tight containers as structurally sound; that grade carries a 5 year structural and 5 year no-leak warranty. Economy containers have visible wear and remain functional for storage. Add vents and ceiling insulation to reduce condensation that can drip onto stored items.
A storage container needs firm, level support under each corner casting, such as compacted gravel, concrete pads or solid timbers, because Minnesota frost can heave uneven blocking. Minnesota Rules, part 1303.1600, subpart 1, sets minimum footing depths of five feet in Zone I and three and a half feet in Zone II when an engineer competent in soil mechanics has made no determination. Hennepin, Ramsey and Olmsted counties are in Zone II. Subpart 2 permits a concrete slab resting directly on the ground for detached one-story private garages, carports and sheds up to 1,000 square feet, on soil other than peat or muck. Ask your local building official which zone your county is in and whether your container needs buried footings, qualifies for that slab exception or may use corner supports.
Delivered prices as of October 14, 2026: starting at $2,465 for a 20ft Wind and Water Tight container delivered in Minneapolis, and starting at $2,995 for a 40ft Wind and Water Tight container delivered in Minneapolis. Your written quote gives the delivered price for your address.
Keep Reading

Related Guides for Minnesota Buyers

Ready to Get a Conex Box Delivered in Minnesota?

Send your ZIP and what you need. A Container One sales representative prepares the written quote.